Strengthen accountability at each post and optimize process workflows.
Recently, Xinfeng Technology convened a special conference on workplace safety for all employees. Company management and personnel from each production line attended, simultaneously outlining measures to strengthen safety management and optimize production processes, thereby solidifying the safety foundation and driving improvements in quality and efficiency. The meeting emphasized that workplace safety is the fundamental prerequisite for all production activities; all staff must strictly adhere to safety procedures, conduct routine hazard inspections at their workstations, assume clear responsibility for safety at their posts, and eliminate any non‑compliant operations. With regard to process optimization, the meeting clearly defined and refined the division of responsibilities for each role, assigning accountability to specific individuals. Technical personnel will lead the development of standardized operating procedures, oversee adjustments to process plans, conduct trials, and provide technical briefings. The material‑cutting team will rigorously follow process parameters to perform raw‑material cutting and sorting, ensuring quality control at the very first stage. The casting and heat‑treatment teams will implement shaping and temperature‑control steps while maintaining meticulous records of process parameters. Quality‑inspection staff will carry out end‑to‑end monitoring and finished‑product testing, ensuring comprehensive quality traceability. Each step in the process has a designated person responsible, with seamless coordination across all stages. Moving forward, the company will leverage more standardized procedures and enhanced safety safeguards to elevate production quality and efficiency, steadily bolstering its market competitiveness.
2026-10-19
Strengthen the safety defense line and rigorously enforce production control.
To further strengthen the principal responsibility for workplace safety, improve the production management system, and standardize operational procedures across all workshop processes, Xinfeng Technology recently convened a special meeting on workplace safety, attended by relevant company managers and key frontline employees. The meeting focused on key priorities such as safety management and the standardization of production workflows. It emphasized that safety is the bottom line for the company’s stable development, and that the company will continue to refine its safety management systems, detail safety control protocols, and ensure that safety responsibilities are assigned to specific posts and individuals. With regard to on-site production oversight, the meeting explicitly required that each production process be documented in a corresponding process card, clearly specifying process parameters, critical operating points, and safety precautions for every step. Operators must strictly follow these process cards, maintain accurate and timely production records, and ensure that the entire production process is traceable and verifiable. Meanwhile, the company will accelerate the implementation of digital management software, leveraging digital tools to integrate data collection, process monitoring, and information aggregation, thereby achieving online management of production and safety data. This digital approach will enhance the effectiveness of safety supervision and production control, reducing safety and quality risks arising from human error. Going forward, Xinfeng Technology will take this meeting as an opportunity to conduct ongoing inspections and address potential safety hazards, steadily advance process standardization and digital management, strengthen safety awareness among all employees, and firmly uphold the red line of workplace safety. By adopting standardized, digitalized management practices, the company aims to ensure safe, stable, and high‑quality growth.
2026-09-16
Watch the on-site hands-on video to solidify your business foundation.
To further enhance employees’ understanding of the casting production process and strengthen their job-specific expertise, our company recently organized a specialized training session on production processes, which was attended by all relevant staff members. During the training, large-screen presentations showcased real‑world operational footage from the factory floor, providing a clear visual overview of key processes in the casting workshop, such as smelting and pouring. The video faithfully captured the entire workflow, including overhead crane operations for handling molten steel and the casting‑pouring process, bringing the workshop’s production scenes directly into the classroom. This allowed participants to observe actual production steps up close, gaining a thorough grasp of critical process points and on‑site operating procedures. Attendees watched attentively, reflecting on and discussing process details in relation to their own roles. By adopting this video‑based training approach—moving beyond purely theoretical instruction—the session became more vivid and engaging, helping employees deepen their understanding of production processes and clearly identify priorities for workplace safety and quality control. Going forward, the company will continue to diversify its training methods, regularly conducting sessions on process technology and safety, thereby continuously enhancing the professional competence of all employees and providing robust support for safe production and consistent product quality improvement.
2026-08-31
Strengthen summer safety production to ensure stable business operations.
Recently, Chaoyang Xinfeng Precision Machinery Technology Development Co., Ltd. convened a special meeting on workplace safety. The meeting was chaired by the company’s chairman, with all senior management in attendance. The chairman emphasized that workplace safety is the paramount prerequisite for the company’s survival and development, directly impacting both employee well-being and the enterprise’s long-term sustainability. He instructed all departments and production workshops to promptly conduct comprehensive, grid‑style inspections for potential hazards, meticulously identifying risks related to equipment operation, on‑site procedures, and storage practices. A corrective action ledger must be established, with deadlines set for implementing improvements to thoroughly eliminate any safety blind spots. In response to the intense summer heat, the meeting made specific arrangements: work hours will be strategically staggered to avoid the peak midday temperatures, and the plant will ensure adequate supplies of cooling beverages and heat‑stroke prevention medications to safeguard frontline workers. This meeting further reinforced a strong commitment to both safety and quality across the organization, fostering a shared understanding of workplace safety and laying a solid foundation for the company’s stable, efficient, and sustainable operations in casting and mechanical processing.
2026-08-12
Recently, Chaoyang Xinfeng Precision Machinery Technology Development Co., Ltd. held a special meeting on technological research and development. At the meeting, the chairman used photographs of defective products from the production floor as a starting point and, drawing on the manufacturing processes for high-manganese steel and chromium‑molybdenum steel castings, conducted an in-depth analysis of the root causes of scrap. He pinpointed shortcomings in process control details, frontline operating procedures, and overall quality awareness among all employees. He emphasized that product quality is the lifeblood of the company; every defective item affects customer trust and the company’s reputation, while also being closely tied to the company’s long-term growth and the direct interests of its workforce. In response to these issues, the chairman explicitly instructed all employees to strictly adhere to production standards and quality‑control procedures, strengthen in‑process inspections and quality traceability, and ensure that the quality of outgoing products remains stable and reliable, thereby providing customers with higher‑quality wear‑resistant castings.
2026-07-27
Every mining customer’s operating conditions and needs are a challenge we meticulously refine. Faced with variations in equipment models, material characteristics, and wear‑inducing operating environments across different mines, Xinfeng Technology’s technical team consistently maintains a rigorous, pragmatic approach, deeply dissecting and repeatedly discussing each client’s requirements. From material selection and structural optimization for wear‑resistant castings to developing operational solutions tailored to the rhythm of the equipment, every detail undergoes multiple rounds of analysis and validation. We reject one‑size‑fits‑all solutions, instead placing the real pain points experienced on-site at the heart of our process. Drawing on years of expertise in R&D of wear‑resistant components for the mining industry, we craft bespoke solutions that deliver exceptional adaptability, superior durability, and significant reductions in total cost of ownership. It is this unwavering commitment to excellence and responsibility toward our customers that enables us to precisely address wear‑related challenges in diverse mining operations, helping clients achieve efficient equipment performance and steady production progress. Looking ahead, we will continue to hone our technology with meticulous craftsmanship, delivering customized solutions that create greater value for mining operators.
2026-06-25
Recently, Chaoyang Xinfeng Precision Machinery Technology Development Co., Ltd. convened a special meeting on workplace safety for all employees. The meeting was chaired by Chairman Zhang Qingbo, who outlined comprehensive measures covering workplace safety, personnel reallocation, and the phased production plan. The meeting placed particular emphasis on upholding the bottom line of workplace safety, addressing risks associated with high‑temperature casting, sand removal, and grinding processes. It mandated that all employees assume full responsibility for safety, conduct regular hazard inspections, adhere to standardized equipment operating procedures, strengthen on‑site protective measures and fire‑safety management, and strictly prohibit any non‑compliant operations. In terms of internal operations, the company announced a personnel reassignment plan, clearly defining roles and responsibilities at each position. Management was instructed to ensure smooth handovers, thereby guaranteeing seamless collaboration and efficient operations across all workshops. In response to domestic and international order demands, the company refined its production schedule for the next phase, coordinating raw material inventory, blank‑part machining, and quality‑inspection procedures. It also tightened controls over the dimensional accuracy and overall quality of wear‑resistant castings, steadily advancing production and delivery commitments. Following the meeting, each department will cascade the key messages throughout its ranks, simultaneously implementing safety improvements, job‑handover protocols, and production scheduling, thus leveraging standardized management to drive the company’s high‑quality, stable growth.
2026-06-15
Kazakhstani clients visit and conduct on-site inspections, discussing potential cooperation.
Recently, a delegation of Kazakhstani clients paid a visit to our factory for an inspection and tour, gaining an in-depth understanding of our production processes and product advantages, and engaging in constructive discussions on future cooperation between the two parties.
2026-04-09
Workers worked through the night to expedite the shipment of export products.
Workshop workers toiled through the night, closely monitoring every stage of production and packaging, racing against time to expedite the shipment of export products and ensure on-time order fulfillment, thereby demonstrating their sense of responsibility and commitment through efficient execution.
2026-03-24
Russian clients visited our factory to discuss new opportunities for collaborative development.
Recently, a delegation of Russian clients paid a visit to our factory for an inspection and tour, during which they toured the production workshops and the finished‑goods exhibition area, gaining an in-depth understanding of our manufacturing processes and quality‑control system. The two sides engaged in thorough discussions on topics such as product supply, technological cooperation, and market expansion, reaching a preliminary consensus on further strengthening collaboration and achieving mutual benefit and win‑win outcomes.
2026-03-16
Last week, Municipal Party Secretary Lao Yanwu conducted an on-site inspection in Longcheng District, reviewing the progress of key project construction, the resumption of work and production at enterprises, and efforts to promote industrial transformation and upgrading. During his visit, he also paid a courtesy call to our factory for guidance and oversight. Chairman Zhang Qingbo accompanied Lao Yanwu into the production workshop, where they inspected every stage of the manufacturing process. Zhang provided a detailed briefing on the company’s operational performance, its R&D achievements, and its market‑expansion strategy. Lao Yanwu expressed keen interest in the company’s development, urging it to continue ramping up investment in technological upgrades and innovation to strengthen its core competitiveness, leverage its technical edge to expand into new markets, and achieve greater breakthroughs in the field of precision manufacturing. Taking this opportunity, the company will deepen its expertise in wear‑resistant castings, contributing to the region’s high‑quality development.
2026-03-10
Focus and unite to embark on a new journey; prioritize safety in pursuit of development.
Immediately following the 2026 Lantern Festival, Xinfeng Technology promptly convened a special meeting on workplace safety. At the meeting, the Chairman delivered an important address, issuing new directives and outlining plans for the year ahead, thereby setting a clear course and rallying collective strength for high-quality development in the coming year. In addressing the key priorities for the year, the Chairman put forward three main requirements: first, to fortify the foundation of safety by continuously refining the workplace safety management system and enhancing both employees’ safety awareness and operational skills; second, to focus on improving production quality, leveraging technological innovation and process upgrades to drive simultaneous improvements in productivity and product quality; and third, to strengthen accountability and responsibility, with managers at all levels taking the lead in fulfilling their duties and ensuring full commitment, while all employees remain dedicated to their roles and deliver concrete results, thus forging a powerful synergy that unites the entire organization in tackling challenges and achieving breakthroughs. The convening of this meeting has laid a solid foundation for Xinfeng Technology’s work in 2026. Moving forward, the company will take the Chairman’s guiding principles as its compass, coordinating efforts across workplace safety, production operations, and innovative development, and striving to write a new chapter of high-quality growth.
2026-03-04
Recently, a delegation of overseas clients visited our company’s production facility to conduct on-site supervision and acceptance of large-scale equipment scheduled for delivery. Relevant company executives and key technical personnel accompanied the team throughout, providing detailed explanations of the product’s manufacturing processes, quality‑control measures, and project‑progress updates. Each unit in this batch weighs approximately 300 tons and will be delivered in staged shipments, with an overall production cycle of about four months. During the acceptance process, the client representatives highly commended the products’ precision machining, consistent performance, and rigorous quality‑management system, expressing full recognition of our company’s expertise and capability in heavy‑equipment manufacturing and contract fulfillment. The successful completion of this on‑site acceptance by our international clients not only serves as strong validation of our product quality and technical prowess but also further strengthens the foundation of our collaboration, laying a solid groundwork for deepening future international business partnerships.
2026-03-02
Recently, our company completed the inspection, packaging, and shipment of a batch of custom‑made wear‑resistant components, with a total delivery volume of approximately 30 tons. The products are critical metal magnetic liners for crushing and heavy‑duty construction machinery. This batch of liners is manufactured from high‑chromium cast iron and alloy steel, combining exceptional hardness with excellent impact resistance. Through optimized chemical composition and precise heat treatment, we ensure a uniform microstructure and stable performance, significantly reducing abnormal wear, premature failure, and unplanned downtime. Our company implements end‑to‑end quality control, covering raw material receipt, in‑process quality checks, mechanical and hardness testing, dimensional and surface inspections, as well as final pre‑shipment inspection and protective packaging. The products meet both customer requirements and export standards, guaranteeing safe long‑distance transportation. Compared with traditional high‑manganese steel liners, our reinforced metal magnetic liners offer a service life that is several to dozens of times longer. The working surface features embedded high‑hardness wear‑resistant inserts, and over 90% of the units are boltless, relying on magnetic attachment for installation. This completely eliminates the issues of bolt loosening and slurry leakage, minimizing maintenance downtime and costs while boosting equipment uptime. With a weight only two‑thirds that of conventional high‑manganese steel liners, these products effectively reduce equipment load and energy consumption, making them an ideal solution for mining operations seeking to conserve energy, cut costs, and improve efficiency. Going forward, we will continue to deepen our expertise in high‑performance wear‑resistant components for mining, crushing, and construction machinery, providing durable products, consistent quality, and professional technical services to customers worldwide.
2026-02-25
Russian customers visit and inspect the products.
This week, a delegation of Russian clients arrived at the factory for a site visit, where they inspected the production process on the ground and conducted quality inspections on completed products. The two sides engaged in detailed discussions regarding product specifications and subsequent delivery arrangements.
2026-01-20
Leaders of Ankuang Machinery paid a visit to conduct an inspection and discuss business matters.
This week, a delegation led by the management of Anshan Mining Machinery paid a visit to our company for an inspection and fact-finding mission, gaining an in-depth understanding of our production and technological capabilities. They also held discussions on future cooperation pathways, laying the groundwork for the synergistic development of both parties’ businesses.
2026-01-12
Address: No. 19, Section 6, Huanghe Avenue, Longcheng District, Chaoyang City, Liaoning Province
Email:
Mobile phone:
Manager Gai:+86 15804066660
Manager Fu:+86 18204201420
Manager Liu：+86 13464222225
Manager Jang：13704916735
Manager Zhang：13842196111
Quick quote
We combine our mature experience with technological innovation to tailor reliable, customized solutions for your project. Please fill out the form, and our sales team will contact you within 24 hours!